https://iot-industrial-devices.com/wp-content/uploads/2020/05/esp32-industrial-hat.png
385
1210
admin
https://iot-industrial-devices.com/wp-content/uploads/2019/11/iot-industrial-devices-1.png
admin2021-09-15 17:50:392021-09-16 11:21:07ESP32 Pi-oT ESP Module platform for Industrial IoT
https://iot-industrial-devices.com/wp-content/uploads/2020/05/nxp-wifi-6-802-11ax.png
385
1210
admin
https://iot-industrial-devices.com/wp-content/uploads/2019/11/iot-industrial-devices-1.png
admin2021-09-14 15:10:322021-09-16 11:20:41New Wi-Fi 6 802.11ax chip from NXP Semiconductors
https://iot-industrial-devices.com/wp-content/uploads/2020/05/qualcomm-212-lte-iot.png
385
1210
admin
https://iot-industrial-devices.com/wp-content/uploads/2019/11/iot-industrial-devices-1.png
admin2021-09-13 16:19:192021-09-16 11:20:16Qualcomm 212 LTE IoT world's most power-efficient LTE modem
Dual Compute Module 4 Cluster for Industrial Edge computing
Updated ClusBerry device for IoT prototyping Recently TECHBASE introduced ClusBerry, an industrial Raspberry Pi based cluster device, utilizing up to 8x Raspberry Pi Compute Module 4 and custom cluster board with a wide range of configuration possibilities. For smaller projects and IoT prototyping, the company designed a smaller and ready-to-deploy cluster device including two independent […]
Embedded Linux SBC from BreadBee – industrial competitor to Raspberry Pi
There are many small and compact Arm Linux SBCs, starting from the NanoPi NEO to the Raspberry Pi Zero or Rock Pi S, but lately a smaller board based on the MStar MSC313E Cortex-A7 SoC from BreadBee with a 64MB RAM appeared, enough to run embedded Linux. Despite MStar MSC313E being a camera processor, the […]
ZigBee Mesh technology used in end-point IoT devices
ZigBee mesh‚s usefulness for IoT is partly due to the fact that it is an open standard. The same products can be used all over the world, which gives customers a large selection of available option. The high competition between products and producers means that the created solutions are innovative, characterized by high quality and […]
Use of Wireless M-Bus for meter monitoring during pandemic
The wM-Bus or Wireless Meter Bus is a European standard (EN 13757-4) that defines communication between usability meters and data loggers, hubs or intelligent meter gates. The M-Bus wireless bus has been developed as a standard to meet the needs of the European network of media meters and remote reading systems and forms the basis […]
Cluster for Industrial Edge computing with two Compute Modules 4
Updated ClusBerry device for IoT prototyping Recently TECHBASE introduced ClusBerry, an industrial Raspberry Pi based cluster device, utilizing up to 8x Raspberry Pi Compute Module 4 and custom cluster board with a wide range of configuration possibilities. For smaller projects and IoT prototyping, the company designed a smaller and ready-to-deploy cluster device including two independent […]
ESP32-PICO-V3-ZERO module from Espressif and Amazon
Espressif Systems and Amazon recently announced the ESP32-PICO-V3-ZERO Alexa Connect Kit (ACK) module, which provides support for features such as out-of-the-box connectivity to the cloud service ACK, Alexa control, „seamless setup”, and Amazon Dash completion for connected devices. This new module is as much as 50% lower in cost. Source: https://developer.amazon.com/en-US/blogs/alexa/device-makers/2020/07/Introducing-the-New-Alexa-Connect-Kit-Module-with-Espressif-Chipset How Alexa Connect Kit Works […]
M5Stack Core2 with Amazon Web Services alternative to ESP32 devices
The M5Stack Core2 is an ESP32 IoT development kit with a 2-inch touchscreen, motion sensor, microphone and battery. The hardware is chosen by Amazon Web Services, with a few little things like adding secure components and the yellow colour that creates „AWS IoT EduKit” hardware and software solutions designed to“learn how to build IoT applications […]