Wpisy

The creators of the Pi-oT module returned to Kickstarter and launched a new module based on ESP32. Thanks to this, users familiar with Arduino programming or preferring lighter architecture can enjoy all the advantages of the IoT module for enterprises.

Pi-oT ESP module key features and specification:

  • Board – ESP32-DevKitC-D32 based on ESP32-WROOM-D32 module with ESP32 dual-core processor, 32Mbit SPI flash
  • Relays – 4x Panasonic SPDT relays controlled via GPIO pins
  • Screws terminals for
    • Relay outputs
    • 6x analog inputs configurable as GPIO if needed
    • 2x analog outputs configurable as GPIO if needed
    • 2x GPIO
    • 5V input, 3.3V, and GND
  • Power Supply – 5V input via terminal or Micro USB port?; 5V circuitry protection
  • Dimensions – DIN rail enclosure

Source: https://www.cnx-software.com/2020/05/04/pi-ot-esp-module-leverages-esp32-screw-terminals-iot-automation/

The ESP Module is a microcontroller based IoT Module which offers the same great features as our Pi-oT Module, but based off on an ESP32 platform. The ESP Module is powered by an ESP32 DEVKITC-32D microcontroller which is included in each reward.

Source: https://www.kickstarter.com/projects/pi-ot/esp-module

Additionally 10 GPIO pins are routed to the housing terminals to utilize the power of ESP32 in a wide range of applications. The flexibility of the ESP32s system allows easy configuration of 6 of these pins as analogue inputs and 2 as analogue outputs.

Industrial use of LoRa & ESP32-based solutions

One of industrial IoT devices, supporting LoRa wireless technology is ESP32 based eModGATE from TECHBASE. Economical, ESP32-based solution can serve as an end-point in any installation or works well as a gateway, gathering data from scattered sensor mesh across the installation. For more information and also Raspberry Pi based solutions check Industrial IoT Shop with all the configuration options for eModGATE.

eModGATE with ESP32

The creators of the Pi-oT module returned to Kickstarter and launched a new module based on ESP32. Thanks to this, users familiar with Arduino programming or preferring lighter architecture can enjoy all the advantages of the IoT module for enterprises.

Pi-oT ESP module key features and specification:

  • Board – ESP32-DevKitC-D32 based on ESP32-WROOM-D32 module with ESP32 dual-core processor, 32Mbit SPI flash
  • Relays – 4x Panasonic SPDT relays controlled via GPIO pins
  • Screws terminals for
    • Relay outputs
    • 6x analog inputs configurable as GPIO if needed
    • 2x analog outputs configurable as GPIO if needed
    • 2x GPIO
    • 5V input, 3.3V, and GND
  • Power Supply – 5V input via terminal or Micro USB port?; 5V circuitry protection
  • Dimensions – DIN rail enclosure

Source: https://www.cnx-software.com/2020/05/04/pi-ot-esp-module-leverages-esp32-screw-terminals-iot-automation/

The ESP Module is a microcontroller based IoT Module which offers the same great features as our Pi-oT Module, but based off on an ESP32 platform. The ESP Module is powered by an ESP32 DEVKITC-32D microcontroller which is included in each reward.

Source: https://www.kickstarter.com/projects/pi-ot/esp-module

Additionally 10 GPIO pins are routed to the housing terminals to utilize the power of ESP32 in a wide range of applications. The flexibility of the ESP32s system allows easy configuration of 6 of these pins as analogue inputs and 2 as analogue outputs.

Industrial use of LoRa & ESP32-based solutions

One of industrial IoT devices, supporting LoRa wireless technology is ESP32 based eModGATE from TECHBASE. Economical, ESP32-based solution can serve as an end-point in any installation or works well as a gateway, gathering data from scattered sensor mesh across the installation. For more information and also Raspberry Pi based solutions check Industrial IoT Shop with all the configuration options for eModGATE.

eModGATE with ESP32