Wprowadzone przez admin

, , ,

ModBerry expands to the latest NanoPi & OrangePi platforms

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations. Read more: http://linuxgizmos.com/automation-controller-runs-linux-on-a-nanopi-neo-sbc/ https://www.cnx-software.com/2017/11/15/techbase-modberry%E2%80%8B-m300-linux-iot-gateway-%E2%80%8Bis-powered-by-nanopi-neo-board/ To ensure constant development of TECHBASE’s solutions and cutting-edge technology, the NanoPi platform part of […]

, , ,

Symbiosis of RaspberryPi and ESP32 in one device

The latest configuration of ModBerry 500 device presents the important milestone in TECHBASE’s offer. The introduction of two platform symbiosis, RaspberryPi Compute Module 3 assisted with Espressif’s ESP32 module brings new possibilities of application to life. High performance of CM3, if compromised by exposition to harsh environmental conditions or sudden drop of power, is aided […]

, ,

ModBerry brings Compute Module 3 to next level of Industrial IoT

Introduced with Moduino series, TECHBASE developed further the project of modular aluminum case for their devices. The latest version of housing allows ModBerry to expand in any dimension, supporting additional extension cards (e.g. I/Os, modems, opto-isolation, accelerometer, etc.) and DIN rail mount, that can be retracted into device itself. TECHBASE constantly improves the project to […]

, , ,

LORA MQTT: Perfect Couple – in RaspberryPi & ESP32 Ecosystem

TECHBASE Industrial Computers are designed for easy integration of LoRa / MQTT networks. ModBerry devices base on Raspberry Pi / NanoPi / Intel UpBoard platform communicate with both Cloud and Sensor layer (backed with ESP32 Moduino devices) of your installation via MQTT protocol. Gateway utilizes the features of many protocol libraries, such as original TECHBASE’s iMod […]

New IoT Gateway based on NanoPi Neo

In October 2017 TECHBASE introduced newest economical addition to their M-Bus/Modbus Gateway family. Success of ModBerry 500 series based on Compute Module 3 and ModBerry M700 based on NanoPi M2 drove to further development of this efficient platform. TECHBASE proudly presents ModBerry M300 powered by NanoPi NEO. CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz […]

M-Bus/Wireless M-Bus support for Moduino X1/X2

Moduino based on ESP32 can now be equipped with TECHBASE’s original mBus10/60/400 converter module. The converter operates as a M-Bus Master and allows user to connect up to 400 standard M-Bus receivers (Slaves) through M-Bus Master output or fewer devices at a higher M-Bus load over long distances. Moduino, as a fully capable Industrial IoT […]

First industrial gateways series based on new ESP32 chips

The newest addition to TECHBASE’s Industrial IoT Ecosystem is a lightweight, but powerful energy-efficient and fully capable automation controller series, called Moduino – an industrial computer for remote data control and management, equipped with latest ESP32 compute module, wide range of serial, digital and analog inputs/outputs and wireless communication interfaces. This cost effective solution is […]

LoRa & NarrowBand-IoT now available for ModBerry series

We proudly announce that ModBerry series devices now supports LoRa and NarrowBand IoT (NB-IoT) modems via extension modules. The new interfaces allows the devices to fully integrate with new networks and systems. LoRa – Low-Power Wide-Area Network (LPWAN) or Low-Power Network (LPN) is a type of wireless telecommunicationwide area network designed to allow long range communications at a low bit rate among things (connected objects), such as […]

Media wrote about ModBerry industrial computer series

Information about our new ModBerry devices spread around the world: http://linuxgizmos.com/linux-based-automation-controller-offers-choice-of-rpi-nanopi-and-up-boards/ http://www.techrepublic.com/article/raspberry-pi-with-an-industrial-flavor-modberry-adds-4g-gps-and-cloud-data/ http://www.cnx-software.com/2017/07/19/modberry-industrial-automation-controllers-leverage-raspberry-pi-friendlyelec-and-aaeon-boards-and-modules/ https://www.automationworld.com/article/techbase-upgrades-modberry-industrial-computer-cm3 Feel free to read latest articles about Compute Module 3 and newest addition to ModBerry series.

ModBerry industrial computer expands to new platforms

Raspberry Pi based industrial computer, ModBerry 500 series expands to new platforms, setting new trends on the industrial automation market. ModBerry family offers now a variety of new processing units, wider range of possible applications due to much higher performance than before. Intel-based industrial computer The first unit that entered the ModBerry series is a […]