Posts

With latest Raspberry Pi Compute Module 4, the Raspberry Foundation added NVMe SSD support via M.2 (PCIe 2.0) interface. Jeff Geerling tested 3 piece M.2 SSD RAID array which is another example how Compute Module 4 is a milestone in IoT applications.

SSD/eMMC benchmark scores for Compute Module 4

With the debut of Raspberry Pi Compute Module 4 and ModBerry 500 CM4 from TECHBASE, another addition came to Industrial Controllers and Edge Automation. New module carried the likelihood to associate NVMe SSD module by means of M.2 slot utilizing PCIe 2.0 interface.

We took our ModBerry 500 CM4 device, utililizing latest Raspberry Pi Compute Module 4 and carried two test:

  • eMMC built-in standard Raspberry Pi Compute Module 4
  • selected NVMe SSD via M.2 slot

Both eMMC and SSD drive perfomed truly well, accomplishing extremely high benchmark score: 5078 for eMMC and unbelivable 13807 for NVM. SSD. For direct correlation, you can check a few tests performed by over 20.000 clients of this benchmark here: https://jamesachambers.com/2020s-fastest-raspberry-pi-4-storage-sd-ssd-benchmarks/?amp

Score of eMMC on ModBerry 500 CM4
Score of NVMe SSD on ModBerry 500 CM4

More benchmark scores can be found here: https://storage.jamesachambers.com/

Order next batch of Raspberry Pi Compute Module 4 devices

TECHBASE’s ModBerry 500 series has gotten an update to Compute Module 4 and is accessible for pre-orders. TECHBASE is leading producer of Industrial Raspberry Pi and Industrial Compute Module applications. ModBerry 500 series is completely viable with all arrivals of Compute Module from Rasbperry Pi Foundation.

Primary highlights of refreshed device are:

  • up to 4x quicker eMMC Flash with up to 32GB capacity
  • up to 2x quicker execution than recent CM3 rendition with quad-center Cortex-A72 4×1.5GHz
  • up to 8x more RAM (8GB LPDDR4)
  • 1Gbit Ethernet interface
  • discretionary PCIe card support for NVMe SSD by M.2
  • discretionary second PCIe support for remote modem arrangements, for example 5G modems

First group of ModBerry 500 CM4 devices has just been dispatched, we are gathering orders for next batch. Hustle just a bit to get your devices rapidly!

With the debut of Raspberry Pi Compute Module 4 and ModBerry 500 CM4 from TECHBASE, another addition came to Industrial Controllers and Edge Automation. New module carried the likelihood to associate NVMe SSD module by means of M.2 slot utilizing PCIe 2.0 interface.

SSD/eMMC benchmark scores for Compute Module 4

We took our ModBerry 500 CM4 device, utililizing latest Raspberry Pi Compute Module 4 and carried two test:

  • eMMC built-in standard Raspberry Pi Compute Module 4
  • selected NVMe SSD via M.2 slot

Both eMMC and SSD drive perfomed truly well, accomplishing extremely high benchmark score: 5078 for eMMC and unbelivable 13807 for NVM. SSD. For direct correlation, you can check a few tests performed by over 20.000 clients of this benchmark here: https://jamesachambers.com/2020s-fastest-raspberry-pi-4-storage-sd-ssd-benchmarks/?amp

Score of eMMC on ModBerry 500 CM4
Score of NVMe SSD on ModBerry 500 CM4

More benchmark scores can be found here: https://storage.jamesachambers.com/

Order next batch of Raspberry Pi Compute Module 4 devices

TECHBASE’s ModBerry 500 series has gotten an update to Compute Module 4 and is accessible for pre-orders. TECHBASE is leading producer of Industrial Raspberry Pi and Industrial Compute Module applications. ModBerry 500 series is completely viable with all arrivals of Compute Module from Rasbperry Pi Foundation.

Primary highlights of refreshed device are:

  • up to 4x quicker eMMC Flash with up to 32GB capacity
  • up to 2x quicker execution than recent CM3 rendition with quad-center Cortex-A72 4×1.5GHz
  • up to 8x more RAM (8GB LPDDR4)
  • 1Gbit Ethernet interface
  • discretionary PCIe card support for NVMe SSD by M.2
  • discretionary second PCIe support for remote modem arrangements, for example 5G modems

First group of ModBerry 500 CM4 devices has just been dispatched, we are gathering orders for next batch. Hustle just a bit to get your devices rapidly!

New Raspberry Pi-sized SBC powered with Ryzen R1305G

Single board computers, or SBCs for English in short, are very popular among enthusiasts and DIY enthusiasts. Although they have been available on the market for a long time, the British Raspberry Pi with its low price and great support contributed to the interest of this market by other manufacturers. Today we will focus on the legendary DFI company, which decided to present its vision of this type of device. It is unique because on the laminate the size of a credit card we find the AMD Ryzen Embedded 1000 chip, DDR4 memory chips, built-in eMMC memory and Mini PCI connector. And all this capable of working under classic Windows or Linux.

DFI GHF51 board (top)

DFI GHF51 is a single-board computer with dimensions of 84 x 55 millimeters. The green laminate features a 2-core and 4-thread AMD Ryzen Embedded R1305G chip working with a 1.5 GHz base clock and a maximum clock speed of 2.8 GHz at a TDP from 8 to 10 W. It has an integrated AMD Radeon Vega graphics chip equipped with 3 CU units that supports H.265 video content, VP9 and 4K resolution. The RAM memory is a single-channel DDR4 with a capacity of 2 to 8 GB and working with a clock up to 3200 MHz. The internal memory is an eMMC system with a capacity of 16 to 64 GB, and the whole is completed by the Mini PCIe connector.

DFI GHF51 board (back)

Industrial use of various development boards

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

A new alternative for the Raspberry Pi was presented. The Raspberry Pi Zero Micro SBC called Kimχ Micro has a quad-core processor and an mPCIe slot for adding PCIe cards.

Kimχ Micro includes the NXP i.MX 8M Mini processor with up to 4 ARM Cortex-A53 cores. These cores can be clocked up to 1.8 GHz and are complemented by the ARM Cortex-M4F real-time core and the Vivante GC NanoUltra 3D graphics processor. The latter allows Kimχ Micro to encode and decode 1080p content at 60 FPS.

In addition, Kimχ Micro SBC contains 1 GB of LPDDR4 RAM, 8 GB of eMMC flash memory and a Micro SD card reader. There is also a serial EEPROM. Kimχ Micro also has a built-in mPCIe connection for adding PCIe cards, such as Wi-Fi cards. By the way, the board must support LTE or LoRA cards.

Kimχ Micro (preliminary) specifications:

  • SoC – NXP i.MX 8M Mini single to quad-core Cortex-A53 processor @ up to 1.8 GHz, Cortex-M4F real-time core @ up to 400 MHz, Vivante GC NanoUltra 3D GPU + GC320 2D GPU, VPU for 1080p60 video decoding and encoding; (Single and dual-core version of NXP i.MX 8M Mini processor are also compatible)
  • System Memory – 2GB LPDDR4
  • Storage – 8GB eMMC flash, MicroSD card socket, serial EEPROM
  • USB – 1x USB 2.0 Type-C port for power and data
  • ExpansionmPCIe socket for wireless cards (e.g. WIFi, 4G LTE, or LoRa).
  • Sparkfun Qwiic header
  • 2x 60-pin high-density I/O headers with Ethernet, USB, camera, display, SAI audio, I2C, SPI, GPIO, PCIe, etc…
  • Debugging – 10-pin JTAG header footprint, Cortex-M4 UART “M4” header, Cortex-A53 “Console” header
  • Misc – Power button, button 1 (boot selection) and button 2 (user button), R, G, and B LEDs
  • Power SupplyUSB PD via USB-C port, NX20P3483UKUSB PD and Type-C high-voltage sink/source combo switch and PTN5110NHQZ TCPC compliant USB Power Delivery (PD) PHY IC
  • 5V unpopulated header
  • 2-pin header for 1S LiPo Battery; on-board PMIC, charging, fuel gauge, and battery protection ICs
  • Dimensions – 65 x 32 mm (FYR – Raspberry Pi Zero: 65 x 30 mm)

Source: https://www.cnx-software.com/2020/06/08/raspberry-pi-zero-sized-kim%cf%87-micro-sbc-quad-core-processor-mpcie-slot/

Industrial use of Raspberry Pi and Raspberry Pi-like boards

A year ago, TECHBASE released an updated version of the ModBerry M500 industrial IoT computer, replacing the aging Raspberry Pi 3 with a 3B+, giving it better performance. With the recent launch of the Raspberry Pi 4, TECHBASE has yet again, announced another upgrade to the M500, which now packs the latest single-board computer.

Over 10 million Raspberry Pi’s have been sold and the Raspberry Pi is likely to stay as a new standard in the industry. Official Raspbian OS is free operating system based on Linux Debian optimized for the Raspberry Pi comes with over 35,000 packages, pre-compiled software bundled in a nice format for easy installation. ModBerry devices are compatible with Raspberry Pi accessories, supported by Raspberry Pi Foundation. ModBerry M500 now with Raspberry Pi 3 Model B+ / Raspberry Pi 4 Model B support.

New industrial grade touch panel with Raspberry Pi

Latest addition to Industrial IoT Ecosystem from TECHBASE is TECHPANEL P500 is an industrial-grade touch panel automation controller for wide range of industrial installations. Equipped with up to date Raspberry Pi Compute Module 3/3+ or Compute Module 3/3+ Lite, 7” capacitive touch display and IP65 hermetic casing with cast gaskets, can be used in harsh conditions of industrial applications.

Raspberry Pi based touch panel features

New TECHPANEL P500 M3/3+ is powered by quad-core Cortex-A53 1.2GHz processor with 1GB RAM and up to 32GB eMMC or 8GB microSD flash memory. Wide range of modems and extra wireline/wireless interfaces via expansion cards makes the TECHPANEL micro-computer a versatile addition to Industrial IoT solutions offered by TECHBASE company.

TECHPANEL devices can easily work remotely with existing ModBerry Gateways & Moduino ESP32 Edge Controllers for data accumulation and monitoring, to perform specific actions before sending the data to cloud services. TECHPANEL with ModuinoModBerry installation can work as standalone Ecosystem (for example via MQTT), providing complex data management solution to any installation.

TECHPANEL P500 M3+ with Compute Module 3+ from Raspberry Pi
TECHPANEL P500 M3+ with Compute Module 3+ from Raspberry Pi

Visual management and available Raspbian OS

The device is equipped with compact 800 x 480 px 7-inch TFT panel with 10 points capacitive touch to allow the user to perform direct actions on-site. With IP65 casing and extended working temperature range, TECHPANEL can be placed almost everywhere.

Over 23 million Raspberry Pi’s have been sold and the Raspberry Pi is likely to stay as a new standard in the industry. Official Raspbian OS is free operating system based on Linux Debian optimized for the Raspberry Pi comes with over 35,000 packages, pre-compiled software bundled in a nice format for easy installation.

TECHPANEL P500 M3+ with Compute Module 3+ from Raspberry Pi
TECHPANEL P500 M3+ with Compute Module 3+ from Raspberry Pi

SPECIFICATION

  • Cortex A53 1.2GHz Processor
  • RAM 1GB, eMMC up to 32GB
  • 7″ TFT screen (800x600px)
  • Capactitive touch screen (10-point)
  • Wide range of expansion modules (Ethernet, RS-232/485/422,  Digital and Analog I/Os, Relay, M-Bus, CAN, optoisolated I/Os, Accelerometer, etc.)
  • Wide range of wireless modules (GPRS/EDGE, 3G/LTE, NarrowBand-IoT, GPS, Wi-Fi, Bluetooth, LoRa, ZigBee, Z-Wave, Sigfox, Wireless M-Bus, etc.)
  • Water-Resistant casing (IP65)
  • Operating temperature: -20°C ~ 70°C
  • Optional SD card support instead of eMMC Flash
ASUS Tinker Edge T - a new Raspberry Pi like SBC

ASUS announced Tinker Edge T in mid-2019, but now officially announces their latest SBC. Edge T expands Tinker Board series, which was already a strong rival of Raspberry Pi and latest Google Coral Dev Board.

The ASUS company has designed Tinker Edge T for AI applications powered with has Google Edge TPU. Google has optimized Edge TPU for machine learning and must be able to run Tinker Edge T up to 4 ter per second operations (TOPS) at just 0.5 W. Therefore, this board is a good candidate for automatic image recognition and other automation projects

ASUS Tinker Edge T
ASUS Tinker Edge T with active cooler

ASUS Tinker Edge T specification

Below you will find complete specification of announced ASUS Tinker Edge T single-board computer:

  • Edge TPU module:
    • SoC – NXP i.MX 8M quad-core Arm Cortex-A53 processor with Arm Cortex-M4F real-time core,  GC7000 Lite 3D GPU
    • ML accelerator – Google Edge TPU coprocessor delivering up to 4 TOPS
    • System Memory – 1 GB LPDDR4 RAM
    • Storage – 8 GB eMMC Flash memory
    • Wireless Connectivity – Wi-Fi 2×2 MIMO (802.11b/g/n/ac 2.4/5GHz) Bluetooth 4.2
  • Baseboard:
    • Storage – MicroSD card slot
    • Networking – Gigabit Ethernet port (via RTL8211F-CG)
    • Video Output – MIPI DSI connector, and HDMI output up to 4K with CEC support
    • Camera I/F – 2x MIPI CSI 2 interfaces for stereoscopic camera applications
    • USB – 2x USB 3.2 gen1 ports, 1x USB-C 3.2 gen1 port
    • Expansion – 40-pin Raspberry Pi compatible color-coded header with GPIO, I2C, PWM, UART, SPI, I2S, etc…
    • Misc – Programmable LEDs
    • Power Supply – 12-19V DC input (up to 45 Watts)
    • Dimensions – 85x56mm

Source: https://www.cnx-software.com/2020/01/28/buy-asus-tinker-edge-t-ai-sbc/

Industrial use of various development boards

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

Latest NanoPi R2S Dual Gigabit Ethernet SBC & Router

The new NanoPi R2S is based on the Rockchip RK3328 processor, adding system memory, including 1 GB DDR4 RAM, and is designed to support 4G LTE via the Huawei 8372H-155 USB dongle. R2S is equipped with two Gigabit Ethernet ports (with one deployed for WAN and the other for LAN). This board can surely be used in industrial and Internet of Things (IoT) applications.

Most features resemble an update, but NanoPi R2S does not have built-in Wi-Fi for unknown reasons and certainly seems to be a downgrade. However, instead of built-in WiFi, friendlyELEC recommends using the RTL8821CU USB dongle, which is immediately supported with the default firmware.

NanoPi R2S specifications:

  • SoC – Rockchip RK3328 quad-core Cortex-A53 @ 1.5 GHz with Arm Mali-450MP2
  • System Memory – 1GB DDR4 RAM
  • Storage – MicroSD Slot, SPI flash footprint
  • 1x Gigabit Ethernet (WAN) up to 941 Mbps (measured)
  • 1x Gigabit Ethernet (LAN) up to 941 Mbps (measured) via Realtek RTL8153 USB 3.0 to Ethernet controller
  • USB – 1x USB Type-A host port, 1x micro USB port (power + slave)
  • Debugging – 3-pin 2.54mm pitch header for serial console
  • Expansion – 10-pin GPIO header with GPIOs, I2C, UART, IR_Rx, 5V, 3.3V and GND
  • Misc – 3x LEDs (WAN, LAN, SYS), K1 reset button, fan header
  • Power Supply – 5VDC/3A via micro USB port
  • Dimensions – 55.6 x 52mm
  • Temperature Range – -20℃ to 70℃

Source: https://www.cnx-software.com/2020/01/16/nanopi-r2s-dual-gigabit-ethernet-sbc-router-is-powered-by-rockchip-rk3328-soc/

NanoPi R2S layout
NanoPi R2S layout

Industrial use of previous OrangePi development boards

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

Latest NanoPi NEO2 Black with IoT accessories & hats

FriendlyElec has launched a new NanoPi microcomputer that can be used in Internet of Things (IoT), automation and storage projects. The NanoPi NEO2 Black measures 40 x 40 mm, weighs 16 grams, and is equipped with an Allwinner H5 four-core processor with ARM Mali-450MP GPU, 1GB DDR3 memory, and has a connector for an eMMC storage module and a slot for a microSD card.

This microcomputer also has two 6-pin and 10-pin connectors, a USB 2.0 socket, a microUSB OTG socket, and a Gigabit Ethernet port (RTL8211E-VB-CG chip). NanoPi NEO2 Black, which can use Armbian, Ubuntu 18.04 (FriendlyCore) and OpenWrt (FriendlyWrt) operating systems, is available to order with a price starting at $ 19.99.

NanoPi NEO2 Black Layout

NanoPi NEO2 Black specifications:

  • SoC – Allwinner H5 quad-core Cortex A53 processor with an ARM Mali-450MP GPU
  • System Memory – 1GB DDR3
  • Storage – MicroSD card slot, eMMC flash module connector
  • Connectivity – Gigabit Ethernet (via RTL8211E-VB-CG chip)
  • USB – 1x USB 2.0 host port, 1x micro USB OTG port, 1x USB via headers
  • Expansion headers10-pin header with I2C, UART, GPIOs, and power signals (5V in/out + GND)
  • 6-pin header with 1x USB, Line Out (stereo), 1x GPIO
  • Debugging – 2-pin unpopulated header for serial console / debugging
  • Misc – Power and system LEDs
  • Power Supply – 5V via micro USB port or VDD pin on headers.
  • Dimensions – 40 x 40 mm
  • Weight – ~16 grams

Source: https://www.cnx-software.com/2019/11/27/buy-nanopi-neo2-black-sbc/

Variety of supported IoT accessories from FriendlyElec

FriendlyElec released plenty of compatible accessories for NanoPi NEO2 Black, including additional eMMC modules, OLED hats and ready-to-use alluminum cases to speed up the implementation.

Latest NanoPi NEO2 Black with IoT accessories & hats
eMMC Modules, compatible alluminum cases and dedicated OLED accessories for NanoPi NEO2 Black

Industrial use of previous OrangePi development boards

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

New Orange Pi 4/4B with six-cores and Neural Processing Unit (NPU)

Shenzhen Xunlong Software recently introduced a new Orange Pi microcomputer. According to information provided by the Chinese company, the Orange Pi 4 measures 91 x 56 mm and features a Rockchip K3399 six-core system-on-chip SoC (ARM Mali-T860 MP4 GPU, 4GB of LPDDR4 memory, 16GB of storage). eMMC (expandable via a microSD card), a 24-pin connector, and a 40-pin General-purpose input / output (GPIO) connector.

Orange Pi 4 six-core system
Orange Pi 4B with Neural Processing Unit (NPU)

This microcomputer is also equipped with two camera connectors, one USB 3.0 jack, two USB 2.0 jacks, one USB 3.0 Type-C jack, HDMI 2.0, Gigabit Ethernet and 3.5mm audio jacks, and includes support for Wi-Fi 802.11ac and Bluetooth 4.1 LE.

The secondly introduced Orange Pi 4B model includes a Gyrfalcon Lightspeeur SPR2801S Neural Processing Unit (NPU), two USB 2.0 sockets, as well as a USB 3.0 Type-C socket.

Orange Pi 4/4B preliminary specifications:

  • SoC – Rockchip K3399 hexa-core big.LITTLE processor with two Arm Cortex A72 cores, four Cortex A53 cores, and an ARM Mali-T860 MP4 GPU with support for OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL and DX 11
  • System Memory – 4 GB LPDDR4
  • Storage – 16 GB eMMC flash, micro SD card
  • NPU (Orange Pi 4B only) – Gyrfalcon Lightspeeur SPR2801S NPU delivering up to 2.8TOPS @ 300mW, 5.6 TOPS @ 100 MHz (peak performance)
  • Video Output/Display Interface
    • HDMI 2.0 up to 4K @ 60 Hz
    • LCD connector for MIPI DSI display
    • USB-C port with DisplayPort Alternate mode
  • Video Decode – 4K VP9 and 10-bit H.265 video codec support up to 60 fps
  • Audio – 3.5mm audio jack for headphones; HDMI digital audio output; built-in microphone; ALC5651 codec
  • Connectivity – Gigabit Ethernet port (via  RTL8211E transceiver), dual-band 802.11ac 2×2 MIMO WiFi and Bluetooth 5.0 (Ampak AP6256 module)
  • USB
    • Orange Pi 4 – 1x USB 3.0 port, 2x USB 2.0 host ports, 1x USB 3.0 type C port
    • Orange Pi 4B – 2x USB 2.0 host ports, 1x USB 3.0 type C port
  • Camera – 2x camera headers
  • Debugging – 3-pin serial header
  • Expansion
    • 40-pin GPIO 2.54mm pitch female header with 2x I2C, 1x SPI/UART, 8x GPIO, etc…
    • 24-pin connector for PCIe signals
  • Power Supply
    • 5V/3A via DC jack
    • 5V via type C portRK808 PMU
  • Dimensions – 91 x 56 mm

Source: https://www.cnx-software.com/2019/11/19/orange-pi-4-4b-sbc-rockchip-rk3399-soc-gyrfalcon-2801s-npu/

Industrial use of previous OrangePi development boards

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

TECHBASE updates M500 devices with Raspberry Pi 4

The newest addition to TECHBASE’s Industrial IoT Ecosystem is an updated ModBerry M500 with latest Raspberry Pi 4 development board, equipped with a 1.5GHz quad-core 64-bit ARM Cortex-A72 processor (approximately 3 times better performance than previous Cortex-A53 powering Raspberry Pi 3+ Model B and Compute Module 3 and 3+). ModBerry M500 can be configured from 1GB / 2GB / 4GB LPDDR4 SDRAM options.

Gigabit Ethernet & USB 3.0 on-board

Another new and appreciated feature is an upgrade to full-throughput Gigabit Ethernet for fast network connection and 2x USB 3.0 / 2x USB 2.0 for additional I/O, data storage extension and fast wireless modem support. ModBerry M500 with Rasbperry Pi 4 has dual-band 802.11ac Wi-Fi and Bluetooth 5.0 on-board. For additional wireless networks expansions, you can choose from variety of Industrial IoT modems from TECHBASE offer, incl. 3G/LTE, NarrowBand-IoT (NB-IoT), Wireless M-Bus, ZigBee, LoRa, Sigfox, Wi-Fi, Bluetooth and many more.

Enhanced Video support for RPi4

The full HDMI port has been replaced with two microHDMI ports with dual monitor support, at resolutions up to 4K, VideoCore VI graphics, supporting OpenGL ES 3.x and 4Kp60 hardware decode of HEVC video. The device is fully compatible with previous versions of Rasbperry Pi based Industrial IoT devices and accessories from TECHBASE.

Raspberry Pi 3 Model B Modberry M500

Raspberry Pi 4 based ModBerry M500 availability

New ModBerry M500 with three variants of Raspberry Pi 4 based devices is available for pre-orders via https://iiot-shop.com/product/modberry-m-series/ For specific delivery time please contact us via e-mail or Live Chat, directly at Industrial IoT Shop.